Connect-CisServer
This cmdlet establishes a connection to the vSphere Automation SDK server specified by the -Server parameter.The connect and disconnect operations for a server are using a reference counting mechanism. Every server is identified by its connection string which contains server, user name, and port. If there is already an existing connection to the server for a specific user name and port, a new connection is not established. Instead, the cmdlet returns the object which represents the existing connection. The RefCount property of the object is incremented by one. Note that the returned object is the same as the one previously returned. Therefore, the RefCount of the previously returned object will be updated as well. When a server is disconnected, then its RefCount property is decreased by one. If this number becomes equal to zero, then the server is disconnected.PowerCLI for vSphere Automation SDK supports a list of default servers. When an operation is performed, if the target servers cannot be determined from the specified parameters, the cmdlet runs against the servers in the default server list. They are kept in a global variable called $DefaultCisServers. It is of an array type and its initial value is an empty array. When you connect to a server, the server is added at the beginning of the array, unless -NotDefault parameter is specified. When you disconnect from a server, the server is removed from the $DefaultCisServers variable. When all servers are removed from the variable its value is an empty array. You can modify the value of the $DefaultCisServers variable manually.
Syntax
Parameters
| Required | Parameter Name | Type | Position | Features | Description |
|---|---|---|---|---|---|
| required
|
Credential | PSCredential | named |
|
Specifies a PSCredential object that contains credentials for authenticating with the server. For more information about the server authentication logic of PowerCLI, run "help about_server_authentication". |
| required
|
Server | String[] | named |
|
Specifies the IP or DNS addresses of the vSphere Automation SDK servers you want to connect to. |
| optional | Force | SwitchParameter | named |
|
Suppresses all user interface prompts during the cmdlet execution. Currently, these include 'Multiple default servers' and 'Invalid certificate action'. |
| optional | NotDefault | SwitchParameter | named |
|
Specifies that you do not want to save the specified servers as default servers. |
| optional | Port | Int32 | named |
|
Specifies the port on the server you want to use for the connection. |
| optional | ProgressAction | ActionPreference | named |
|
|
| optional | SaveCredentials | SwitchParameter | named |
|
Indicates that you want to save the specified credentials in the local credential store. |
Parameters
| Required | Parameter Name | Type | Position | Features | Description |
|---|---|---|---|---|---|
| required
|
Server | String[] | named |
|
Specifies the IP or DNS addresses of the vSphere Automation SDK servers you want to connect to. |
| optional | Force | SwitchParameter | named |
|
Suppresses all user interface prompts during the cmdlet execution. Currently, these include 'Multiple default servers' and 'Invalid certificate action'. |
| optional | NotDefault | SwitchParameter | named |
|
Specifies that you do not want to save the specified servers as default servers. |
| optional | Password | SecureString | named |
|
Specifies the password you want to use for authenticating with the server. If the Credential parameter is also specified, this parameter is ignored. For more information about the server authentication logic of PowerCLI, run "help about_server_authentication". Note: If the password contains special characters, enclose the entire string in single quotes ('). |
| optional | Port | Int32 | named |
|
Specifies the port on the server you want to use for the connection. |
| optional | ProgressAction | ActionPreference | named |
|
|
| optional | SaveCredentials | SwitchParameter | named |
|
Indicates that you want to save the specified credentials in the local credential store. |
| optional | User | String | named |
|
Specifies the user name you want to use for authenticating with the server. If the Credential parameter is also specified, this parameter is ignored. For more information about the server authentication logic of PowerCLI, run "help about_server_authentication". Note: If the user name contains special characters, enclose the entire string in single quotes ('). |
Parameters
| Required | Parameter Name | Type | Position | Features | Description |
|---|---|---|---|---|---|
| required
|
Menu | SwitchParameter | named |
|
Indicates that you want to select a connection server from a list of recently connected servers. If Menu is set to $true, the cmdlet retrieves a list of the last visited servers and enters a nested command prompt, so that you can select a server from the list. |
| optional | ProgressAction | ActionPreference | named |
|
Parameters
| Required | Parameter Name | Type | Position | Features | Description |
|---|---|---|---|---|---|
| required
|
SamlSecurityContext | SamlSecurityContext | named |
|
Specifies the SAML2 security context for the vCenter Server system. For more information about security contexts, see the about_security_context (about_security_context.html)article. |
| required
|
Server | String[] | named |
|
Specifies the IP or DNS addresses of the vSphere Automation SDK servers you want to connect to. |
| optional | Force | SwitchParameter | named |
|
Suppresses all user interface prompts during the cmdlet execution. Currently, these include 'Multiple default servers' and 'Invalid certificate action'. |
| optional | NotDefault | SwitchParameter | named |
|
Specifies that you do not want to save the specified servers as default servers. |
| optional | Port | Int32 | named |
|
Specifies the port on the server you want to use for the connection. |
| optional | ProgressAction | ActionPreference | named |
|
Parameters
| Required | Parameter Name | Type | Position | Features | Description |
|---|---|---|---|---|---|
| required
|
Server | String[] | named |
|
Specifies the IP or DNS addresses of the vSphere Automation SDK servers you want to connect to. |
| required
|
SessionSecret | String | named |
|
Specifies the ID of an existing vSphere Automation SDK session you want to reestablish. |
| optional | Force | SwitchParameter | named |
|
Suppresses all user interface prompts during the cmdlet execution. Currently, these include 'Multiple default servers' and 'Invalid certificate action'. |
| optional | NotDefault | SwitchParameter | named |
|
Specifies that you do not want to save the specified servers as default servers. |
| optional | Port | Int32 | named |
|
Specifies the port on the server you want to use for the connection. |
| optional | ProgressAction | ActionPreference | named |
|
Output
Examples
Example 1
Connect-CisServer -Server $serverAddress -User $user -Password $pass
Connects to a vSphere Automation SDK server by using the User and Password parameters.
Example 2
$credential = Get-Credential Connect-CisServer -Server $serverAddress -Credential $credential
Connects to a vSphere Automation SDK server by using the Credential parameter.
Example 3
$serverConnection = Connect-CisServer -Server $serverAddress -User $user -Password $pass Connect-CisServer -Server $serverAddress -SessionSecret $serverConnection.SessionSecret
Connects to a vSphere Automation SDK server by using the SessionSecret parameter.
Example 4
Connect-CisServer -Server $serverAddress -Credential -User $user -Password $pass -SaveCredential
Connects to a vSphere Automation SDK server and stores the credentials in the credential store.
Example 5
Connect-CisServer -Server $serverAddress -User $user
Connects to a vSphere Automation SDK server when a record for the specified user is available in the credential store.
Example 6
$oauthCtx = New-VcsOAuthSecurityContext -ApiToken "a3f35067-80b5-44f0-a0bc-e19f2bc17fb7" $samlCtx = New-VISamlSecurityContext -VCenterServer $serverAddress -OAuthSecurityContext $oauthCtx Connect-CisServer -Server $serverAddress -SamlSecurityContext $samlCtx
Connects to a vSphere Automation SDK server that runs in a VMware managed cloud using an API token from the VMware Cloud Services portal.
Related Commands
CisServer
This cmdlet establishes a connection to a vSphere Automation SDK server.
This cmdlet closes the connection to one or more vSphere Automation SDK servers.