Get Defaults Clusters Policies Apply

Get Defaults Clusters Policies Apply

Returns the configured policy that has been set. if you do not have all of the privileges described as follows:

  • Operation execution requires VcIntegrity.lifecycleSettings.Read.
Request
URI
GET
https://{api_host}/api/esx/settings/defaults/clusters/policies/apply
COPY
Authentication
This operation uses the following authentication methods.
Responses
200

The configured policies that impact the apply operation

{
    "failure_action": {
        "action": "string",
        "retry_delay": 0,
        "retry_count": 0
    },
    "pre_remediation_power_action": "string",
    "enable_quick_boot": false,
    "disable_dpm": false,
    "disable_hac": false,
    "evacuate_offline_vms": false,
    "enforce_hcl_validation": false,
    "parallel_remediation_action": {
        "enabled": false,
        "max_hosts": 0
    }
}
Settings_Defaults_Clusters_Policies_Apply_FailureAction
failure_action
Optional

The Apply.FailureAction structure contains fields that describe the actions to be taken when entering maintenance mode fails on a single host within the cluster.

Settings_Defaults_Clusters_Policies_Apply_ConfiguredPolicySpec_PreRemediationPowerAction
pre_remediation_power_action
Optional

The Apply.ConfiguredPolicySpec.PreRemediationPowerAction enumerated type defines the possible actions to be taken on VMs before entering maintenance mode.
POWER_OFF_VMS : Power off VMs before entering maintenance mode.
SUSPEND_VMS : Suspend VMs before entering maintenance mode
DO_NOT_CHANGE_VMS_POWER_STATE : Do not change the VM power state
SUSPEND_VMS_TO_MEMORY : Suspend VMs to Memory before entering maintenance mode

boolean
enable_quick_boot
Optional

Enable Quick Boot during remediation in the cluster. If unset, configured value would be unset.

boolean
disable_dpm
Optional

Disable DPM on the cluster. If unset, configured value would be unset.

boolean
disable_hac
Optional

Disable HA Admission control on the cluster. If unset, configured value would be unset.

boolean
evacuate_offline_vms
Optional

Evacuate powered off/suspended VMs when attempting maintenance mode. If unset, configured value would be unset.

boolean
enforce_hcl_validation
Optional

Enforce Hcl validation, when applicable, to prevent remediation if hardware compatibility issues are found. If unset, hardware compatibility issues will not prevent remediation.

Settings_Defaults_Clusters_Policies_Apply_ParallelRemediationAction
parallel_remediation_action
Optional

parallel_remediation_action


401

com.vmware.vapi.std.errors.unauthenticated : if the caller is not authenticated.

Returns Std_Errors_Error of type(s) application/json 
{
    "messages": [
        {
            "id": "string",
            "default_message": "string",
            "args": [
                "string"
            ],
            "params": {
                "params": {
                    "s": "string",
                    "dt": "string",
                    "i": 0,
                    "d": "number",
                    "l": {
                        "id": "string",
                        "params": {
                            "params": "Std_LocalizationParam Object"
                        }
                    },
                    "format": "string",
                    "precision": 0
                }
            },
            "localized": "string"
        }
    ],
    "data": {},
    "error_type": "string"
}
array of Std_LocalizableMessage
messages
Required

Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.

Each subsequent message in the stack describes the "cause" of the prior message.

object
data
Optional

Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.

The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.

Some operations will not set this field when reporting errors.

Std_Errors_Error_Type
error_type
Optional

Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.


500

com.vmware.vapi.std.errors.error : If there is an unknown internal error. The accompanying error message will give more details about the failure.

Returns Std_Errors_Error of type(s) application/json 
{
    "messages": [
        {
            "id": "string",
            "default_message": "string",
            "args": [
                "string"
            ],
            "params": {
                "params": {
                    "s": "string",
                    "dt": "string",
                    "i": 0,
                    "d": "number",
                    "l": {
                        "id": "string",
                        "params": {
                            "params": "Std_LocalizationParam Object"
                        }
                    },
                    "format": "string",
                    "precision": 0
                }
            },
            "localized": "string"
        }
    ],
    "data": {},
    "error_type": "string"
}
array of Std_LocalizableMessage
messages
Required

Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.

Each subsequent message in the stack describes the "cause" of the prior message.

object
data
Optional

Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.

The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.

Some operations will not set this field when reporting errors.

Std_Errors_Error_Type
error_type
Optional

Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.


503

com.vmware.vapi.std.errors.service_unavailable : If the service is not available.

Returns Std_Errors_Error of type(s) application/json 
{
    "messages": [
        {
            "id": "string",
            "default_message": "string",
            "args": [
                "string"
            ],
            "params": {
                "params": {
                    "s": "string",
                    "dt": "string",
                    "i": 0,
                    "d": "number",
                    "l": {
                        "id": "string",
                        "params": {
                            "params": "Std_LocalizationParam Object"
                        }
                    },
                    "format": "string",
                    "precision": 0
                }
            },
            "localized": "string"
        }
    ],
    "data": {},
    "error_type": "string"
}
array of Std_LocalizableMessage
messages
Required

Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.

Each subsequent message in the stack describes the "cause" of the prior message.

object
data
Optional

Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.

The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.

Some operations will not set this field when reporting errors.

Std_Errors_Error_Type
error_type
Optional

Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.


default

'Default' means this response is used for all HTTP codes that are not covered individually for this operation.

Returns Std_Errors_Error of type(s) application/json 
{
    "messages": [
        {
            "id": "string",
            "default_message": "string",
            "args": [
                "string"
            ],
            "params": {
                "params": {
                    "s": "string",
                    "dt": "string",
                    "i": 0,
                    "d": "number",
                    "l": {
                        "id": "string",
                        "params": {
                            "params": "Std_LocalizationParam Object"
                        }
                    },
                    "format": "string",
                    "precision": 0
                }
            },
            "localized": "string"
        }
    ],
    "data": {},
    "error_type": "string"
}
array of Std_LocalizableMessage
messages
Required

Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.

Each subsequent message in the stack describes the "cause" of the prior message.

object
data
Optional

Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.

The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.

Some operations will not set this field when reporting errors.

Std_Errors_Error_Type
error_type
Optional

Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.


On This Page
Settings Operations
GET
Get Defaults Clusters Policies Apply
PUT
Set Defaults Clusters Policies Apply