Get Vm Hardware Boot
Returns the boot-related settings of a virtual machine.
Virtual machine identifier. The parameter must be an identifier for the resource type: VirtualMachine.
Boot-related settings of the virtual machine.
{
"type": "string",
"efi_legacy_boot": false,
"network_protocol": "string",
"delay": 0,
"retry": false,
"retry_delay": 0,
"enter_setup_mode": false
}The Boot.Type enumerated type defines the valid firmware types for a virtual machine.
BIOS : Basic Input/Output System (BIOS) firmware.
EFI : Extensible Firmware Interface (EFI) firmware.
Flag indicating whether to use EFI legacy boot mode. This field is optional and it is only relevant when the value of Boot.Info.type is EFI.
The Boot.NetworkProtocol enumerated type defines the valid network boot protocols supported when booting a virtual machine with EFI firmware over the network.
IPV4 : PXE or Apple NetBoot over IPv4.
IPV6 : PXE over IPv6.
Delay in milliseconds before beginning the firmware boot process when the virtual machine is powered on. This delay may be used to provide a time window for users to connect to the virtual machine console and enter BIOS setup mode.
Flag indicating whether the virtual machine will automatically retry the boot process after a failure.
Delay in milliseconds before retrying the boot process after a failure; applicable only when Boot.Info.retry is true.
Flag indicating whether the firmware boot process will automatically enter setup mode the next time the virtual machine boots. Note that this flag will automatically be reset to false once the virtual machine enters setup mode.
com.vmware.vapi.std.errors.unauthenticated : if the user can not be authenticated.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.unauthorized : if the user doesn't have the required privileges.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.not_found : if the virtual machine is not found.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.error : if the system reports an error while responding to the request. | com.vmware.vapi.std.errors.resource_inaccessible : if the virtual machine's configuration state cannot be accessed.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.service_unavailable : if the system is unable to communicate with a service to complete the request.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
'Default' means this response is used for all HTTP codes that are not covered individually for this operation.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.