Get Defaults Clusters Policies Apply
Returns the configured policy that has been set. if you do not have all of the privileges described as follows:
- Operation execution requires VcIntegrity.lifecycleSettings.Read.
The configured policies that impact the apply operation
{
"failure_action": {
"action": "string",
"retry_delay": 0,
"retry_count": 0
},
"pre_remediation_power_action": "string",
"enable_quick_boot": false,
"disable_dpm": false,
"disable_hac": false,
"evacuate_offline_vms": false,
"enforce_hcl_validation": false,
"parallel_remediation_action": {
"enabled": false,
"max_hosts": 0
},
"enforce_quick_patch": false,
"config_manager_policy_spec": {
"serial_remediation": false
}
}The Apply.FailureAction structure contains fields that describe the actions to be taken when entering maintenance mode fails on a single host within the cluster.
The Apply.ConfiguredPolicySpec.PreRemediationPowerAction enumerated type defines the possible actions to be taken on VMs before entering maintenance mode.
POWER_OFF_VMS : Power off VMs before entering maintenance mode.
SUSPEND_VMS : Suspend VMs before entering maintenance mode
DO_NOT_CHANGE_VMS_POWER_STATE : Do not change the VM power state
SUSPEND_VMS_TO_MEMORY : Suspend VMs to Memory before entering maintenance mode
Enable Quick Boot during remediation in the cluster. If unset, configured value would be unset.
Disable DPM on the cluster. If unset, configured value would be unset.
Disable HA Admission control on the cluster. If unset, configured value would be unset.
Evacuate powered off/suspended VMs when attempting maintenance mode. If unset, configured value would be unset.
Enforce Hcl validation, when applicable, to prevent remediation if hardware compatibility issues are found. If unset, hardware compatibility issues will not prevent remediation.
parallel_remediation_action
Enforce quick patch on the cluster for images that support it. If unset, configured value would be unset.
This specification defines the settings to manage the com.vmware.esx.settings.clusters.Configuration.apply API behaviour.
com.vmware.vapi.std.errors.unauthenticated : if the caller is not authenticated.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.error : If there is an unknown internal error. The accompanying error message will give more details about the failure.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
com.vmware.vapi.std.errors.service_unavailable : If the service is not available.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
'Default' means this response is used for all HTTP codes that are not covered individually for this operation.
{
"messages": [
{
"id": "string",
"default_message": "string",
"args": [
"string"
],
"params": {
"params": {
"s": "string",
"dt": "string",
"i": 0,
"d": "number",
"l": {
"id": "string",
"params": {
"params": "Std_LocalizationParam Object"
}
},
"format": "string",
"precision": 0
}
},
"localized": "string"
}
],
"data": {},
"error_type": "string"
}Stack of one or more localizable messages for human error consumers. The message at the top of the stack (first in the list) describes the error from the perspective of the operation the client invoked.
Each subsequent message in the stack describes the "cause" of the prior message.
Data to facilitate clients responding to the operation reporting a standard error to indicating that it was unable to complete successfully. Operations may provide data that clients can use when responding to errors. Since the data that clients need may be specific to the context of the operation reporting the error, different operations that report the same error may provide different data in the error. The documentation for each each operation will describe what, if any, data it provides for each error it reports.
The ArgumentLocations, FileLocations, and TransientIndication structures are intended as possible values for this field. DynamicID may also be useful as a value for this field (although that is not its primary purpose). Some services may provide their own specific structures for use as the value of this field when reporting errors from their operations.
Some operations will not set this field when reporting errors.
Enumeration of all standard errors. Used as discriminator in protocols that have no standard means for transporting the error type, e.g. REST.
ERROR : Discriminator for the Error type.
ALREADY_EXISTS : Discriminator for the AlreadyExists type.
ALREADY_IN_DESIRED_STATE : Discriminator for the AlreadyInDesiredState type.
CANCELED : Discriminator for the Canceled type.
CONCURRENT_CHANGE : Discriminator for the ConcurrentChange type.
FEATURE_IN_USE : Discriminator for the FeatureInUse type.
INTERNAL_SERVER_ERROR : Discriminator for the InternalServerError type.
INVALID_ARGUMENT : Discriminator for the InvalidArgument type.
INVALID_ELEMENT_CONFIGURATION : Discriminator for the InvalidElementConfiguration type.
INVALID_ELEMENT_TYPE : Discriminator for the InvalidElementType type.
INVALID_REQUEST : Discriminator for the InvalidRequest type.
NOT_ALLOWED_IN_CURRENT_STATE : Discriminator for the NotAllowedInCurrentState type.
NOT_FOUND : Discriminator for the NotFound type.
OPERATION_NOT_FOUND : Discriminator for the OperationNotFound type.
RESOURCE_BUSY : Discriminator for the ResourceBusy type.
RESOURCE_IN_USE : Discriminator for the ResourceInUse type.
RESOURCE_INACCESSIBLE : Discriminator for the ResourceInaccessible type.
SERVICE_UNAVAILABLE : Discriminator for the ServiceUnavailable type.
TIMED_OUT : Discriminator for the TimedOut type.
UNABLE_TO_ALLOCATE_RESOURCE : Discriminator for the UnableToAllocateResource type.
UNAUTHENTICATED : Discriminator for the Unauthenticated type.
UNAUTHORIZED : Discriminator for the Unauthorized type.
UNEXPECTED_INPUT : Discriminator for the UnexpectedInput type.
UNSUPPORTED : Discriminator for the Unsupported type.
UNVERIFIED_PEER : Discriminator for the UnverifiedPeer type.
curl -H 'Authorization: <value>' https://{api_host}/api/esx/settings/defaults/clusters/policies/apply
# Module 'VMware.Sdk.vSphere.Esx.Settings'
Invoke-GetDefaultsClustersPoliciesApply