VMwareVspanSession
The VMwareVspanSession data object defines the configuration of a VLAN Services and Protocols for Advanced Networks (VSPAN) session.
You use a VSPAN session for the following operations:
- To mirror network traffic (inbound/outbound) from a set of source entities to a set of destination entities.
- To assist in troubleshooting.
- As input for security and other network analysis appliances.
The type of entities that you can specify as source or destination is determined by the session type. You can use uplink distributed virtual ports only for mixed destination mirror VSPAN sessions (mixedDestMirror). For all sessions except mixedDestMirror sessions, you cannot use uplink distributed virtual ports as destination ports. sessionType is required for vSphere Distributed Switch 5.1 and later, ignored for prior version if set.
Session Type | Source | Destination |
---|---|---|
mixedDestMirror | Distributed Ports | Distributed Ports + Uplink Ports Name |
dvPortMirror | Distributed Ports | Distributed Ports |
remoteMirrorSource | Distributed Ports | Uplink Ports Name |
remoteMirrorDest | VLAN | Distributed Ports |
encapRemoteMirrorSource | Distributed Ports | IP address |
{
"_typeName": "string",
"key": "string",
"name": "string",
"description": "string",
"enabled": false,
"sourcePortTransmitted": {
"_typeName": "string",
"portKey": [
"string"
],
"uplinkPortName": [
"string"
],
"wildcardPortConnecteeType": [
"string"
],
"vlans": [
0
],
"ipAddress": [
"string"
]
},
"sourcePortReceived": {
"_typeName": "string",
"portKey": [
"string"
],
"uplinkPortName": [
"string"
],
"wildcardPortConnecteeType": [
"string"
],
"vlans": [
0
],
"ipAddress": [
"string"
]
},
"destinationPort": {
"_typeName": "string",
"portKey": [
"string"
],
"uplinkPortName": [
"string"
],
"wildcardPortConnecteeType": [
"string"
],
"vlans": [
0
],
"ipAddress": [
"string"
]
},
"encapsulationVlanId": 0,
"stripOriginalVlan": false,
"mirroredPacketLength": 0,
"normalTrafficAllowed": false,
"sessionType": "string",
"samplingRate": 0,
"encapType": "string",
"erspanId": 0,
"erspanCOS": 0,
"erspanGraNanosec": false,
"netstack": "string"
}
The generated key as the identifier for the session.
The display name.
The description for the session.
Whether the session is enabled.
This class defines the ports, uplink ports name, vlans and IP addresses participating in a Distributed Port Mirroring session.
See VMwareVspanSession.
This class defines the ports, uplink ports name, vlans and IP addresses participating in a Distributed Port Mirroring session.
See VMwareVspanSession.
This class defines the ports, uplink ports name, vlans and IP addresses participating in a Distributed Port Mirroring session.
See VMwareVspanSession.
VLAN ID used to encapsulate the mirrored traffic.
Whether to strip the original VLAN tag.
if false, the original VLAN tag will be preserved on the mirrored traffic. If encapsulationVlanId has been set and this property is false, the frames will be double tagged with the original VLAN ID as the inner tag.
An integer that describes how much of each frame to mirror.
If unset, all of the frame would be mirrored. Setting this property to a smaller value is useful when the consumer will look only at the headers. The value cannot be less than 60.
Whether or not destination ports can send and receive "normal" traffic.
Setting this to false will make mirror ports be used solely for mirroring and not double as normal access ports.
Type of the session.
See VMwareDVSVspanSessionTypeEnum for valid values. Default value is mixedDestMirror if unspecified in a VSPAN create operation.
Sampling rate of the session.
If its value is n, one of every n packets is mirrored. Valid values are between 1 to 65535, and default value is 1.
Encapsulation type of the session.
See VMwareDVSVspanSessionEncapTypeEnum for valid values. Default value is encapProtocolGRE if unspecified in a VSPAN create operation.
Timestamp Granularity.
If the value is false, timestamp-granularity will be microsecond. Otherwise the timestamp-granularity will be nanosecond This value is applicable only if encaptType is erspan3
Netstack instance of the session.