HostNvmeDiscoveryLogEntry
This data object represents a single entry in the Discovery Log returned by a Discovery controller.
{
"_typeName": "string",
"subnqn": "string",
"subsystemType": "string",
"subsystemPortId": 0,
"controllerId": 0,
"adminQueueMaxSize": 0,
"transportParameters": {
"_typeName": "string"
},
"transportRequirements": "string",
"connected": false
}
NVME Qualified name of the discovered subsystem.
Corresponds to the SUBNQN field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec.
NVM Subsystem type.
Corresponds to the SUBTYPE field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec. The set of supported values is described in HostNvmeDiscoveryLogSubsystemTypeEnum.
NVM subsystem port ID.
Corresponds to the PORTID field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec. For an overview, see:
- "NVM Express over Fabrics 1.0", Section 1.5.2, NVM Subsystem
NVME Controller ID within the NVM subsystem.
Corresponds to the CNTLID field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec. In the static controller model, this field may be set to a specific controller ID which can be used to connect to that particular controller. It could also be set to 0xFFFE (65534 in decimal), in which case the controller ID will be allocated when a connection is established. In the dynamic controller model, this field shall be set to 0xFFFF (65535 in decimal). Note that this is different from the controllerNumber controllerNumber, which is the unique identifier of the NVMe controller within the entire host and is allocated only after a connection is established.
The maximum size of the Admin Submission Queue.
Corresponds to the ASQSZ field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec. This applies to all controllers within the NVM Subsystem. When establishing a connection, the value of adminQueueSize may not exceed this value.
This data object represents the transport specific parameters necessary to establish an NVM Express over Fabrics connection.
For some further information, see:
- "NVM Express over Fabrics 1.0", Section 1.5.7, "Connection"
The requirements for NVME Transport.
Corresponds to the TREQ field in the Discovery Log Page Entry as specified by the NVME over Fabrics spec The set of possible values is described in HostNvmeDiscoveryLogTransportRequirementsEnum
Indicates whether the controller represented by this Discovery Log Page Entry is already connected to the adapter through which the discovery is initiated.