NSX CLI Guide

get lldp neighbors <lldp-interface-name>

Displays LLDP Neighbor information on given device.

Parameters:

Option	Description
<interface-name>	LLDP interface argument

Example:

nsx-edge-1> get lldp neighbors eth0 Device : eth0 Neighbor Count : 1 Neighbors Neighbor : eth0/0:50:56:b7:7f:47 Life Time : 111 System Name : NSX ESG System Desc : NSX Edge Services Gateway System Cap : ['Router'] Enabled Cap : ['Router'] Chassis Id : eth0 Port Id : 0:50:56:b7:7f:47 Port Desc : management iface Mgmt Address Address : 10.172.139.51 Addr Family : IPv4 Iface Number : 2 Iface Type : 2 MAC PHY Status AutoNeg : supported AutoNeg Status: enabled PMDAutoNeg : supported PMDAutoNeg Status: not-enabled MAU Type : 16 Power via MDI Port Class : PSE Power Source : supported PSE MDI State : enabled PSE Pair Ctrl : yes PSE Pair : 1 PSE Class : 2 Link Aggregation Aggr Capability: yes Aggr Status : enabled Aggr Port Id : 1

Mode:

Basic

Availability:

• Autonomous Edge
• Edge