NSX CLI Guide

get gateway interface <dpd-uuid-lrouter-port-arg> stats

Display statistics for the specified gateway interface.

Parameters:

Option Description
<uuid> Datapath UUID argument


Example:

nsx-edge-1> get gateway interface 6c427841-e151-4479-9184-4196cfcef3b6 stats interface : 6c427841-e151-4479-9184-4196cfcef3b6 ifuid : 266 VRF : e9d3379d-aba7-4459-9262-18bc95eaeec1 IP/Mask : 172.20.1.60/24 MAC : 00:0c:29:5a:96:2b VLAN id : 101 Segment port: 986ab7c0-acda-465f-8cda-1b9b84cd2518 urpf-mode : STRICT_MODE admin : up op_state : up MTU : 1600 statistics RX-Packets : 1331 RX-Bytes : 455202 RX-Drops : 1331 Blocked : 0 DST-Unsupported: 1331 Firewall : 0 Malformed : 0 No-Receiver : 0 No-Route : 0 RPF-Check : 0 Protocol-Unsupported: 0 IPv6 : 0 Port-Unsupported: 0 TTL-Exceeded: 0 Kni : 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 TX-Packets : 11 TX-Bytes : 462 TX-Drops : 0 Blocked : 0 Firewall : 0 Frag-Needed : 0 No-ARP : 0 No-Memory : 0 No-Linked-Port: 0 IPsec : 0 IPsec-NoSA : 0 IPsec-NoVTI : 0 IPsec-Policy-Error: 0 IPsec-Policy-Block: 0 IP Ressemble Fragments-OK: 0 Fragemnts-Error: 0 Fragments-Timeout: 0 IP Fragment Fragments-OK: 0 Fragments-Error: 0

Mode:

Basic

Availability: