NSX CLI Guide

get route [<prefix>]

Display detailed information of an IPv4 route in RIB. Specify a prefix or IPv4 address to display only the route used for that network.

Parameters:

Option	Description
<prefix>	Prefix or IP address with optional prefix length

Example:

nsx-edge-1(tier0_sr)> get route 22.3.3.0/24 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, b - BGP, t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, > - selected route, * - FIB route Total number of routes: 1 t0s> * 22.3.3.0/24 [103/0] via 50.50.50.10, uplink-273, 00:49:52

Mode:

Tier0 SR

Availability:

• Autonomous Edge
• Edge