NSX CLI Guide

get logical-router <uuid> route ospf [<prefix>]

Display IPv4 OSPF routes for a specified prefix in RIB.

Parameters:

Option Description
<uuid> Datapath UUID argument
<prefix> Network Address argument


Example:

Edge-1> get logical-router 43d96cff-989e-4ff9-98d6-107e816146cd route ospf 30.30.30.0/24 Flags: t0c - Tier0-Connected, t0s - Tier0-Static, b - BGP, o - OSPF t0n - Tier0-NAT, t1s - Tier1-Static, t1c - Tier1-Connected, t1n: Tier1-NAT, t1l: Tier1-LB VIP, t1ls: Tier1-LB SNAT, t1d: Tier1-DNS FORWARDER, t1ipsec: Tier1-IPSec, isr: Inter-SR, > - selected route, * - FIB route Total number of routes: 1 o > * 30.30.30.0/24 [110/20] via 40.40.40.10, uplink-292, 00:03:20

Mode:

Basic

Availability: