NSX CLI Guide

get ipsecvpn ikesa active sessionid <ipsec-vpn-session-id-arg>

Display IKE security association in active state.

Parameters:

Option	Description
<session-id>	IKE Session ID

Example:

nsx-edge-1> get ipsecvpn ikesa active sessionid 3 Total Number of Active IKE SAs: 1 IKE Version : IKEv2 IKE Status : Up IKE Session ID : 3 Session Name : Tunnel-62791cf0-7a541cb-915a6e5d-b6ed32f6 Session Type : Policy Based IKE SPI Initiator : 0x0c6a7a809f4a6e2f IKE SPI Responder : 0x33bbea1267703b12 Role : Initiator Number of Child SA Pairs : 2 Created Timestamp : 2017-09-25 03:02:45 IKE SA Uptime : 163 sec IKE SA Lifetime : 1000 sec DPD Probe Interval : 600 sec IP Address: Local : 10.112.202.147 Remote : 10.112.200.243 Identity: Local : [email protected] (email) Remote : [email protected] (email) Algorithm: Encryption : aes128-cbc Authentication : hmac-sha2 PRF : hmac-sha2 DH Group : 14 Authentication Method : Pre-shared key ----------------------------------------

Mode:

Basic

Availability:

• Autonomous Edge
• Edge