NSX CLI Guide

get gateway <dpd-uuid-lrouter-arg> ospf interface

Display OSPF interface information.

Parameters:

Option Description
<uuid> Datapath UUID argument


Example:

nsx-edge-1> get gateway 3a57c438-7ee9-4ba2-92ef-6f758931e1be ospf interface uplink-275 is up ifindex 32, MTU 1500 bytes, BW 0 Mbit Internet Address 40.40.40.1/24, Broadcast 40.40.40.255, Area 0.0.0.0 MTU mismatch detection: enabled Router ID 40.40.40.1, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 40.40.40.10, Interface Address 40.40.40.10 Backup Designated Router (ID) 40.40.40.1, Interface Address 40.40.40.1 Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5 Hello due in 0.745s Neighbor Count is 1, Adjacent neighbor count is 1

Mode:

Basic

Availability: