NSX CLI Guide

get bond <bond name> [stats]

Display the bond interface with the specified name. Specify the stats argument to display the statistics for the interface.

Parameters:

Option Description
<bond-name> Datapath device name argument


Example:

nsx-edge-1> get bond bond0 Bond Hash algorithm : layer 2+3+4 Mode : lacp active Name : bond0 Port id : 2 Slaves : Name : fp-eth0 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 1 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Name : fp-eth1 LACP state : Local admin key : 11 Local oper key : 11 Local oper port state : ACT FTO AGG DEF Local port internal state: LACP_ENABLED Local port number : 2 Local port priority : 255 Local port rx machine state: DEFAULTED Local timeout cfg : fast Partner age in sec : 2 Partner device id : 00:00:00:00:00:00 Partner mode : LACP passive Partner oper key : 0 Partner oper port state: Partner port number : 0 Partner port priority : 0 Partner timeout cfg : slow State : stand-alone State : active Status : up nsx-edge-1> get bond bond0 stats Bond Name : bond0 Slaves : Name : fp-eth0 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 Name : fp-eth1 LACP drops : 0 Rx LACP errors : 0 Rx LACP pdus : 10 Tx LACP errors : 0 Tx LACP pdus : 10 name : bond0 rx_bytes : 1488 rx_drop_no_match : 0 rx_errors : 0 rx_misses : 0 rx_nombufs : 0 rx_packets : 12 tx_bytes : 0 tx_drops : 0 tx_errors : 0 tx_packets : 0

Mode:

Basic

Availability: