NSX CLI Guide

get bgp neighbor <ip-address>

Display information about a specifie BGP neighbor.

Parameters:

Option Description
<ip-address> Network IP address argument


Example:

nsx-edge-1(tier0_sr)> get bgp neighbor 50.50.50.10 BGP neighbor is 50.50.50.10, remote AS 1000, local AS 2000, external link Hostname: prome-mdt-dhcp412 BGP version 4, remote router ID 50.50.50.10, local router ID 50.50.50.1 BGP state = Established, up for 2d13h46m Last read 00:00:30, Last write 00:00:32 Hold time is 180, keepalive interval is 60 seconds Configured hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: 4 Byte AS: advertised and received AddPath: IPv4 Unicast: RX advertised IPv4 Unicast and received Route refresh: advertised and received(old & new) Address Family IPv4 Unicast: advertised and received Hostname Capability: advertised (name: nsx-edge-1,domain name: n/a) received (name: prome-mdt-dhcp412,domain name: n/a) Graceful Restart Capabilty: advertised and received Remote Restart timer is 120 seconds Address families by peer: none Graceful restart informations: End-of-RIB send: IPv4 Unicast End-of-RIB received: IPv4 Unicast Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 14 13 Notifications: 2 16 Updates: 10 10 Keepalives: 3850 3845 Route Refresh: 0 0 Capability: 0 0 Total: 3876 3884 Minimum time between advertisement runs is 0 seconds Update source is 50.50.50.1 For address family: IPv4 Unicast Update group 49, subgroup 49 Packet Queue length 0 Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 6; dropped 5 Last reset 2d13h46m, due to Interface down Local host: 50.50.50.1, Local port: 179 Foreign host: 50.50.50.10, Foreign port: 39948 Nexthop: 50.50.50.1 Nexthop global: 2005::2828:2801 Nexthop local: fe80::53ff:feb2:c1ad BGP connection: shared network BGP Connect Retry Timer in Seconds: 120 Estimated round trip time: 1 ms Read thread: on Write thread: on BFD Status: peer 50.50.50.10 status down

Mode:

Tier0 SR

Availability: