NSX CLI Guide

set service ike debug-tunnel local-ip <ipv4-addr> remote-ip <ipv4-addr> debug-level <debug-level-arg> follow

Enable or disable ike per tunnel debug mode

Parameters:

Option Description
<ipv4-addr> IPv4 Address
<debug-level-arg> IKE Debug level
Allowed values: off, fail, highok, highstart, uncommon, midok, midstart, lowok, lowstart


Example:

nsxedge> set service ike debug-tunnel local-ip 192.168.128.1 remote-ip 1.1.5.100 debug-level midok follow 29-May-2019 20:53:28 ssh_stack IKEv2 packet S(192.168.128.1:500 -> 1.1.5.100:500): len= 80, mID=165, HDR 29-May-2019 20:53:28 ssh_stack responder INFO completed 29-May-2019 20:53:58 ssh_stack [670ba4b198/349435e0b00] R: IKE SA REFCNT: 1

Mode:

Basic

Availability: